U-Line ADA15IM Guide de dépannage télécharger pdf (Page 11)

ADA15IM 9

ADA SERIES

Door Alignment Check and Adjustment

IMPORTANTIMPORTANT

Properly aligned, the door’s gasket should be firmly

in contact with the cabinet all the way around the

door (no gaps). Carefully examine the door’s gasket

to assure that it is firmly in contact with the

cabinet. Also make sure the door gasket is not

pinched on the hinge side of the door.

Figure 9

1. Loosen (do not remove) top (Figure 10) and bottom

hinge screws.

2. Align door squarely with cabinet.

3. Make sure gasket is firmly in contact with cabinet all

the way around the door (no gaps).

4. Tighten bottom hinge screws.

5. Tighten top hinge screws.

Door Reversal

To reverse the door, perform the following:

1. Remove the grille (two screws).

Figure 10

2. Remove top hinge from cabinet (three screws)

(Figure

11)

. Hold door to keep it from falling.

3. Lift the door off the bottom hinge.

Figure 11

4. Remove bottom hinge from cabinet (two screws)

(Figure 12)

ULIN_0143_A

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

U-Line ADA15IM Guide de dépannage Page 11