U-Line CLR1215 Guide de l'utilisateur télécharger pdf (Page 27)

USER GUIDE

Door Adjustments 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Remove bottom hinge:

1. Remove bottom hinge from cabinet.

2. Remove corresponding screws on opposite side of

cabinet. On some models there may be a nut behind

one or both screws on either side.

Install bottom hinge:

Install two or three screws, depending on model. Replace

nuts if used.

Prepare door for reinstallation:

1. Rotate door 180° to reverse.

2. Remove gasket center strip and apply in-line with new

opening (approximately 2" lower).

Install top hinge and door:

1. Use alternate hinge supplied with unit and reinstall the

screws.

2. Hold door to keep it from falling.

3. Lift the door on to the bottom hinge.

4. Align flat edge of the hinge with the outer edge of the

unit.

5. Tighten three screws.

Align and adjust the door:

Align and adjust the door (see DOOR ALIGNMENT AND

ADJUSTMENT).

Install grille:

Install the grille.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Pas de commentaire

U-Line CLR1215 Guide de l'utilisateur Page 27