U-Line ADA series Guide de l'utilisateur télécharger pdf (Page 20)

USER GUIDE

Door Adjustments 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

3. Remove bottom hinge from cabinet by removing three

screws. Support the door and hinge assembly and

remove it from the cabinet.

4. Remove four screws from hinge holes on the opposite

side. Reinstall into holes where the hinge was

removed. Take care not to scratch cabinet.

5. Remove it from the cabinet. Repeat for cabinet base.

Prepare door for reinstallation:

1. Rotate door 180° to reverse.

2. Align the flat edge of the hinge with the outer edge of

the cabinet.

3. Hold door to keep from falling.

4. Tighten three screws.

5. Align flat edge of the hinge with the outer edge of the

unit.

6. Tighten three screws.

Align and adjust the door:

Align and adjust the door (see DOOR ALIGNMENT AND

ADJUSTMENT).

Install grille:

Install the grille.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Pas de commentaire

U-Line ADA series Guide de l'utilisateur Page 20