U-Line ADA series Guide de l'utilisateur télécharger pdf (Page 26)

USER GUIDE

Interior Shelves 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Interior Shelves

REMOVING AND INSTALLING INTERIOR

SHELVES

For models equipped with glass shelves having recessed

shelf supports, remove the shelves as follows:

1. Pull shelf out about 6" (1), until back of shelf clears the

“hump” on the right-hand side.

2. Tilt up right-hand edge of shelf (2).

3. Remove shelf from unit by pulling out (3).

Insert the shelves as follows:

1. To move to a different position in the unit, insert shelf

at an angle, approximately 15-20°, over the rib in the

side of the unit where you want to place the shelf.

Place the shelf into the unit at an angle to clear the

door.

2. Continue to slide the shelf into the unit at an angle

until it clears the door.

Lower the shelf and push it in completely. E

nsure the

raised edge strip is toward the rear of the unit.

NOTICE

Make sure the shelves are inserted fully into the

unit.

The edge strip toward the rear prevents cans

and bottles from freezing against the cold

evaporator.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Pas de commentaire

U-Line ADA series Guide de l'utilisateur Page 26